Red.com Red Focus Instruction Manual download pdf (Page 22)

Build 31 v31.6.16 Beta

CAMERA CONNECTORS

RIGHT SIDE OF CAMERA

This section describes the physical connectors on the RED ONE camera body. For detailed description

and operation refer to APPENDIX D: INPUT/OUTPUT CONNECTORS.

Headphone

USB Slave

Program HD-SDI (A)

Audio Out

Program HD-SDI (B)

Timecode

Preview HD-SDI

Audio In Ch 1 – 4 (1-2 Upper

Left - Right, 3-4 Lower Left -

Right)

Video Genlock

Viewfinder for RED EVF

HDMI Out

Monitor for RED LCD

USB Master

Aux / RS232

Figure 5 – Right Side Camera Connections

The right side of the camera contains all the video, audio and time code inputs and outputs.

From top left to bottom right, these comprise a 3.5mm stereo headphone (A), and four DIN 1.0/2.3 video

connectors that support Program HD-SDI (B, C), Preview HD-SDI (D) and Video (E).

Next is an HDMI output (F), a USB (G) to connect the camera to another camera or to connect a USB

memory device to update camera firmware, a USB-2 “slave” port (H) to connect the camera to another

camera or computer based controller, a 5-pin mini-XLR audio output (I), a 5-pin timecode input/output (J)

and four (4) 3-pin mini-XLR (K). Finally there are two 16-pin push lock LEMO connectors (L, M) that pro-

vide video, communications and power for a RED EVF (L) and RED LCD (M), and a 10-pin push lock LE-

MO connector (N) supporting the Aux/RS232 port that can interface to a variety of B4 lenses and lens mo-

tor control devices.

One 6-inch length DIN 1.0 / 2.3 to BNC video adaptor cable and one 9-inch length 3-pin mini-XLR to mini-

XLR cable plus a mini-XLR to full size XLR adaptor are provided with the camera.

Additional video and audio adaptor cables may be ordered online at www.RED.com/store.

D E

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 164 165

No comments

Red.com Red Focus Instruction Manual Page 22