Red.com Red Focus Instruction Manual download pdf (Page 12)

Build 31 v31.6.16 Beta

4. Twist joystick to select MENUS (DVI) or VIDEO (720p) in the PVW OUTPUT box above the EVF RE-

FRESH box - default is VIDEO (720p).

5. To set selection and exit the menu, push the EXIT button or move the joystick up two times (x2).

The Preview Output setting will be held in camera memory. Once it is set it will not need to be re-set when

power cycling the camera.

RED EVF / BOMB EVF / RED LCD

The optional RED LCD, RED EVF and BOMB (Pro) EVF are specialized video monitors, that may be at-

tached to the camera body, and provide a variety of user tools to assist framing, focus and exposure.

The RED EVF provides a 1280 pixel x 848-pixel resolution progressive scan color image equivalent to

viewing a 17” reference color monitor from a distance of approximately 4 ft.

The BOMB EVF can display either the upper 784 lines or lower 784 lines of the 1280 x 848 pixel viewfinder

output. To toggle between these two options, simultaneously press both User Key 3 and User Key 4, lo-

cated on the front surface of the BOMB EVF.

IMPORTANT: For optimal performance, the BOMB EVF should be operated after an approximate 15

minute warm-up time.

Surround View, which is an additional visible area outside the actual recorded image.

Frame guidelines show common film presentation and television formats such as 2.40:1 and 1.85:1, pic-

ture center, and/or television aspect ratios such as 16:9, 14:9 and 4:3.

Focus is aided by the high resolution of the displays, 1:1 Focus Check function, and two user selectable

waveform based focus assist meters.

Exposure is aided by dual zebras a false color meter and Luma and RGB histograms.

System information including instantaneous frame rate, sensitivity, shutter speed, color temperature, re-

cording format, clip name, timecode, battery and media remaining is provided in the RED LCD or RED

EVF monitor outputs, and the rear status display on the camera back.

For applications where a RED LCD, RED EVF or BOMB (Pro) EVF are not desired – for example working

on a crane – the Surround View video, frame guides, and exposure overlays are also available on the Pre-

view HDMI and Preview HD-SDI output, providing remote camera monitoring up to 200 ft away.

NOTE: When exiting OPEN GATE mode, the BOMB EVF will display a color bar test pattern for one

(1) frame.

RED EVF and BOMB (Pro) EVF in SYNC refresh mode may experience a temporary video blanking when:

• Exiting MAGNIFY (Image Zoom) at 4K resolution

• Changing Project RESOLUTION

• Changing Varispeed frame rate

External monitors may experience a temporary disturbance when:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 164 165

No comments

Red.com Red Focus Instruction Manual Page 12