Red.com Red Focus Instruction Manual download pdf (Page 11)

Build 31 v31.6.16 Beta

10 10

This setting supports a guaranteed minimum of 18dB of input signal headroom above reference, plus the

maximum available Signal to Noise Ratio for the resulting 24-bit digital recording.

VIDEO MONITORING OUTPUTS

In its default configuration, the RED ONE camera can simultaneously support a RED EVF, RED LCD, 3

HD-SDI outputs and one HDMI output, with two of these outputs supporting full GUI overlay graphics.

Default setting for GUI support is RED EVF and RED LCD. However, if either one of these is not present,

full GUI overlay support is automatically enabled on HD-SDI and HDMI outputs.

RED EVF: 1280 x 848 resolution RGB 4:4:4 progressive video display with Surround View, frame guides

and safe action / title overlays, zebra and false color exposure overlays, waveforms, camera status and

operation menus.

BOMB (Pro) EVF: 1280 x 848 resolution RGB 4:4:4 progressive video display with Surround View, frame

guides and safe action / title overlays, zebra and false color exposure overlays, waveforms, camera status

and operation menus. Can display either the upper 784 lines or lower 784 lines of the 1280 x 848 pixel

viewfinder output.

RED LCD: 1024 x 600 resolution RGB 4:4:4 progressive video display with Surround View, frame guides

and safe action / title overlays, zebra and false color exposure overlays, waveforms, camera status and

operation menus.

HD-SDI (2): Also referred to as Program HD-SDI. When in record mode, these connectors provide two

extra copies of the HD-SDI PREVIEW signal. When in playback mode, these connectors provide a dual-

link 10-bit RGB 4:4:4 video signals conforming to SMPTE 372M.

PREVIEW HD-SDI: 1280 x 720 resolution 10-bit 4:2:2 video output (720p 50.00 /59.94 Hz).

PREVIEW HDMI: 1280 x 720 resolution 10-bit 4:2:2 video output (720p 50.00 /59.94 Hz).

NOTE: If a RED EVF or RED LCD is connected, the PREVIEW HD-SDI and HDMI outputs will provide

Surround View, frame guides, safe action / title, and timecode / clip name. If both a RED EVF and

RED LCD are connected, PREVIEW HD-SDI and HDMI outputs only support Surround View.

NOTE: Only if a RED EVF or RED LCD is connected, the HDMI output can also support a 1280 x 848

resolution video output with Surround View, frame guides, safe action / title, timecode / clip name,

waveform, and camera status and operation menu overlays. This signal should be compatible with

the majority of DVI based SXGA+ computer monitors.

To select between these modes perform the following:

1. Push the SYSTEM menu button.

2. Using joystick, select MONITOR. Push the joystick in or down to select.

3. Using the joystick, select PREVIEW.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 164 165

No comments

Red.com Red Focus Instruction Manual Page 11