Red.com RED ONE User Manual download pdf (Page 8)

6 6

3. Gently rotate the CF Module to allow access to the two (2) connectors.

4. Disconnect the Serial ATA and e-SATA connectors by carefully pulling on the connector itself.

CAUTION: DO NOT pull on the harness or yank on the CF module to disconnect the Serial ATA

and e-SATA connectors. This may damage the harness, connectors, CF Module and/or compo-

nents inside the RED ONE camera body. Damage that occurs to your camera, CF Module or

SSD Module while installing your RED ONE 1.8” SSD Module IS NOT covered under warranty.

5. Remove the CF Module from the camera body.

Carefully Pull Connectors

to Disconnect

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Red.com RED ONE User Manual Page 8